Application Example
EPC-A10 web guiding at an elevated roller section
This customer installation combines an elevated roller path, sensing hardware beside the web edge and a cabinet-mounted KRD EPC-A10 controller.
Web passing over the roller → sensing hardware at the upper web edge → machine-side EPC-A10 control panel.
Open video file ↗In this installation
- Application
- Elevated web path with sensing beside the material edge
- Installed KRD products
- KRD EPC-A10 web guide controllerLocal web-guiding control interface
- Installation arrangement
- Sensing at the upper web path; EPC-A10 in the machine-side cabinet
A closer look at the equipment
Material path, installed components and mounting details.
Enlarge image
Enlarge image
Enlarge image
The roller path and sensing position
The light-coloured web passes over a roller and continues through an elevated section of the machine. A closer view shows sensing hardware beside the upper material edge, including its mounting position relative to the web and the machine frame.
The KRD control interface
A KRD EPC-A10 edge/line position controller is installed in the machine-side cabinet. The cabinet view locates this interface within the customer equipment. Together, the views provide a reference for discussing the web route, edge-sensing position and controller location when planning a similar installation.