LC Series Shaft-through Tension Detector
Product Image
Product Introduction
The LC shaft-through tension detector is designed for idler/live roller installation. Two specifications and multiple rated loads are available. It uses full-bridge strain gauge detection for accurate web tension measurement on various materials. The LC series can be mounted directly on machine frames or by base plate. Its compact, shaft-through structure makes it a preferred choice for many applications.
Key Features
- Low hysteresis
- Temperature compensation
- Full-bridge strain gauge
- Excellent linearity and stability
- Suitable for idler/live roller detection
- Overload capacity up to 500% rated load
Technical Parameters
Excitation voltage
10VDC
Output signal
2mV/V (factory setting)
Strain gauge resistance
350Ω
Detection type
Full-bridge
Maximum output signal
150% TYP
Combined error
(Hysteresis, repeatability, nonlinearity) <0.50%
Maximum overload
500% of rated load
Installation Drawing
尺寸图，单位：毫米 mm
| Model | A | B | C | D | E | F | H | I (Mounting Hole) |
|---|---|---|---|---|---|---|---|---|
| F17 | 17 | 36 | 60 | 104 | 75 | 3 | 35 | 6.5 |
| F20 | 20 | 36 | 60 | 104 | 75 | 3 | 35 | 6.5 |
| F25 | 25 | 45 | 70 | 125 | 95 | 4 | 40 | 10 |
| F30 | 30 | 45 | 70 | 125 | 95 | 4 | 40 | 10 |