KTC818A

Product Image

Product Introduction

KTC818A is a calculating-type tension controller with a new graphic LCD display and clearer Chinese/English interface. According to the product detail sheet, it outputs 0-24VDC control voltage for magnetic powder clutches and brakes, and can also output 0-10V signals to drive inverters, servo motors or other actuators for high-precision web tension control in printing, packaging, paper, cable, rubber-plastic, battery and textile applications.

Key Features

• 32-bit high-speed CPU with graphic LCD and user-friendly operation
• Supports thickness accumulation method with one proximity switch or encoder plus material thickness input
• Supports speed ratio method with two proximity switches or encoders and no material thickness input
• Supports ultrasonic detectors with no further setup after sensor calibration
• Unique analog speed-signal ratio method that reads speed directly from the inverter without extra hardware
• Dual-station switching
• Dual 24V/4A outputs for directly driving two brakes or clutches
• 0-10V or 4-20mA output for inverter or servo drive
• Simple commissioning and simple tension calibration process
• Standard Modbus communication with open parameters for PLC or touchscreen integration
• Password protection prevents accidental parameter changes
• Supports four calculating modes