KTC812
Product Image
Product Introduction
According to the product detail sheet, KTC812 is a calculating-type semi-auto tension controller using the thickness accumulation method. It supports manual and auto operation, can connect an encoder or proximity switch, stores nine material parameter groups, automatically calculates reel radius, and provides constant or taper tension control.
Key Features
- Manual / Auto working modes
- Adjustable torque compensation for magnetic powder brake or clutch
- Works after setting only three simple parameters
- Supports encoder or proximity switch connection
- Stores nine material parameter groups
- Automatically calculates reel radius
- Constant tension and taper tension control
- 0-24V / 4A output with automatic over-current protection
- Automatically memorizes all system parameters and status
- Upper and lower radius alarm function can be configured
Technical Parameters
Power Supply
AC165-264V, 50/60Hz
Inputs
Main shaft pulse signal (encoder or proximity switch compatible) and reel reset signal
Control Output
DC0-24V / 4A for magnetic powder clutch / brake
Auxiliary Supply
DC24V for proximity switch or encoder
Control Method
Thickness accumulation method
Parameter 01
Initial radius
Parameter 02
Material thickness
Parameter 03
Taper coefficient
Parameter 04
Starting compensation point
Parameter 05
Compensation coefficient
Wiring Diagram
Installation Drawing
Note: All dimensions in this section are in mm.
