KTC811
Product Image
Product Introduction
According to the product detail sheet, KTC811 is a calculating-type semi-auto tension controller that can work in manual or auto mode, connect to an encoder or proximity switch, automatically calculate reel radius and current speed, and perform constant or taper tension control through speed-ratio operation.
Key Features
- Manual / Auto working modes
- Adjustable torque compensation for magnetic powder brake or clutch
- Works after setting only the main shaft radius, without material thickness setup
- Supports encoder or proximity switch input
- Automatically calculates reel radius and current speed
- Constant tension and taper tension control
- 0-24V / 4A output with automatic over-current protection
- Automatically memorizes all system parameters and status without reset after each roll
Wiring Diagram
